Setting The Red And Blue Gain; Enabling E-Flip And Mirror Image; Enabling Or Disabling Vertical Phase Edge (Line Lock); Setting The Vertical Phase Edge (Line Lock) - Honeywell ACUIX Installation And Configuration Manual

Task/Action (with Default)

Setting the Red and Blue Gain

1. Turn Manual White Balance ON.
2. Select 5 Camera Options
• [2 or 6] Red Gain
• [3 or 7] Blue Gain
3. Toggle to select a value based on camera model:
• For models HDXA, HDXJ and HDXF, select from a range
between 0 (low) and 255 (high). The default is 200.
• For model HDXG, select from a range between 0 (low) and
511 (high). The default is 128.

Enabling E-Flip and Mirror Image


1. 5 Camera Options
2. As required, set:
• 2 E-Flip either ON (enabled) or OFF (disabled)
• 3 Mirror Image either ON (enabled) or OFF (disabled)

Enabling or Disabling Vertical Phase Edge (Line Lock)

Caution Requires an AC power supply.
Select 5 Camera Options
Disabled (default).

Setting the Vertical Phase Edge (Line Lock)

Caution Requires an AC power supply.
1. Enable the Vertical Phase Edge.
2. Select 5 Camera Options
between 0 (default) and 359.9.
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
 
4 White Balance
5 Video Options.
 
6 Vert Phase Edge
 
7 Vert Phase enter a number
Notes
Available with all camera models.
For models HDXA, HDXJ and HDXF, the
menu selection is 6 Red Gain and 7 Blue
Gain.
For HDXG, the menu selection is 2 Red
Gain and 3 Blue Gain.
Available with HDXF, HDXG and HDXA
camera models.
The E-Flip function turns the video output
from the camera upside down.
The Mirror Image function reverses the
video output from the camera
horizontally.
Available with all camera models.
Enabled or If you enable the Vertical Phase Edge,
you can set the Vertical Phase from 0 to
359.9.
Available with all camera models.
85