Parameter Verification - Mitsubishi Electric FR-F700 Series Instruction Manual

4.10 Parameter verification

Whether same parameter values are set in other inverters or not can be checked.
Operation
1.
Replace the operation panel on the
inverter to be verified.
• Replace it during a stop.
2.
Screen at powering on
The monitor display appears.
3.
Press to choose the parameter
setting mode.
4.
Turn until
appears.
5.
Press to read the currently set
value.
" "(initial value) appears.
6.
Turn to change it to the set value
of " "(parameter copy verification mode).
7.
Press to read the parameter setting
of the verified inverter to the operation panel.
• If different parameters exist, different
parameter numbers and
• Hold down
8.
It there is no difference,
flicker to complete verification.
REMARKS
When the copy destination inverter is not the FR-F700 series, "model error (
flickers ... Why?
Set frequencies, etc. may be different. Check set frequencies.
(parameter copy)
flicker.
to verify.
and
Flicker ··· Parameter verification complete!!
Parameter verification
Display
The parameter
number read
previously appears.
The frequency flickers
for about 30s
Flickering
)" is displayed.
4
61