Selection Of The Operation Command And Frequency Command Locations (Pr.79) - Mitsubishi Electric FR-F700 Series Instruction Manual

4.6 Selection of the operation command and frequency
command locations (Pr.79)
Select the operation command location and frequency command location.
Parameter Initial
Name
Number Value
Operation
79 mode
selection
* For the terminal used for the X12 signal (PU operation interlock signal) input, assign "12" in Pr. 178 to Pr. 189 (input terminal function selection) to
assign functions.
For Pr. 178 to Pr. 189, refer to the Instruction Manual (applied).
When the X12 signal is not assigned, function of the MRS signal switches from MRS (output stop) to PU operation interlock signal.
Setting
Range
Use external/PU switchover mode (press
switch between the PU and external operation mode.
0
(Refer to page 34))
At power on, the inverter is in the external operation
mode.
1 Fixed to PU operation mode
Fixed to external operation mode
2 Operation can be performed by switching between the
external and NET operation mode.
External/PU combined operation mode 1
Running frequency
PU (FR-DU07/FR-PU04)
3
setting or external signal
input (multi-speed setting,
across terminals 4-5 (valid
when AU signal turns on)).
0
External/PU combined operation mode 2
Running frequency
4
External signal input
(Terminal 2, 4, 1, JOG,
multi-speed selection, etc.)
Switchover mode
Switch among PU operation, external operation, and
6
NET operation while keeping the same operation
status.
External operation mode (PU operation interlock)
X12 signal ON*
Operation mode can be switched to the PU
operation mode.
7
(output stop during external operation)
X12 signal OFF*
Operation mode can not be switched to the PU
operation mode.
Selection of the operation command and
frequency command locations (Pr.79)
Description
to
Start signal
External signal input
(terminal STF, STR)
Start signal
Input from the PU (FR-
DU07) ( ,
LED Indication
: Off
: On
External operation mode
PU operation mode
External operation mode
NET operation mode
)
PU operation mode
External operation mode
NET operation mode
PU operation mode
External operation mode
57
4