Appendix 3For Customers Who Have Replaced The Older Model With This Inverter; Appendix 3-1Replacement Of The Fr-F500 Series - Mitsubishi Electric FR-F700 Series Instruction Manual

Appendix 3 For customers who have replaced the older model with
this inverter
Appendix 3-1 Replacement of the FR-F500 series
(1) Instructions for installation
1)Removal procedure of the front cover was changed. (with screws) Please note. (Refer to page 4.)
2)Removal procedure of the operation panel was changed. (with screws) Please note. (Refer to page 4.)
3)Plug-in options of the F500 series are not compatible
4)Operation panel (FR-DU04) can not be used.
5)Setup software (FR-SW0-SETUP) can not be used.
(2) Wiring instructions
1)The control circuit terminal block can be used for the FR-F700 series without removing wiring.
FR-F500 series
(Note that the relay output 2 (A2, B2, C2) specific for the FR-F700 series can not be used with the FR-F500 series
terminals.)
(3) Instructions for continuous use of the FR-PU04 (parameter unit)
1) For the FR-F700 series, many functions (parameters) have been added. When setting these parameters, the
parameter name and setting range are not displayed. Parameter list, change list, initial value list, initial value
list 2 and parameter clear of the HELP function can not be used.
2) For the FR-F700 series, many protective functions have been added. These functions activate, but alarms
are not displayed. In addition, these are not included in the alarm history and not displayed. Alarm history
clear and trouble shooting can not be used for additional functions.
3) User initial value setting can not be used.
4) User registration/clear (user group 2) can not be used.
5) Parameter copy/verification function can not be used.
FR-F700 series
For customers who have replaced the older model with this inverter
125