Appendix 1 For Customers Who Have Replaced The Conventional Model With This Inverter; Appendix 1-1 Replacement Of The Fr-E500 Series - Mitsubishi Electric FR-E720-0.1 K Instruction Manual

APPENDIX
Appendix 1 For customers who have replaced the conventional model
with this inverter

Appendix 1-1 Replacement of the FR-E500 series

(1) Instructions for installation
Removal procedure of the front cover was changed.
1)
2) The operation panel cannot be removed from the inverter.
Plug-in options of the FR-E500 series are not compatible
3)
4) Setup software (FR-SW0-SETUP, FR-SW1-SETUP, FR-SW2-SETUP) can not be used.
(2) Instructions for continuous use of the FR-PU04 (parameter unit)
For the FR-E700 series, many functions (parameters) have been added. User initial value list and user
1)
clear of the HELP function can not be used.
For the FR-E700 series, many protective functions have been added. These functions activate, but all
2)
faults are displayed as "Fault 14". When the faults history has been checked, "E.14" appears. Added
faults display will not appear on the parameter unit
3) User initial value setting can not be used.
4) User registration/clear (user group 2) can not be used.
5) Parameter copy/verification function can not be used.
(3) Parameter resetting
It is easy if you use setup software (FR Configurator SW3).
322
(Refer to page 5)
.
.