Chapter 6
Cajun Campus CLI – Layer 2
• show arp-tx-
interval
• show self-loop-
discovery
Show time Command
Use the show time command to display the current stack time.
The syntax for this command is:
show time
Example:
Cajun_P330-N> show time
10:32:34 27 JAN 2000 GMT
Show timezone Command
Use the show timezone command to display the current stack timezone.
The syntax for this command is:
show timezone
Example:
Cajun_P330-N> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
Show ntp Command
Use the show ntp command to display the address of the Network Time Protocol
(NTP) server in addition to other time related status information.
The syntax for this command is:
show ntp
Example:
Cajun_P330-N> show ntp
Current time: 10:37:04 27 JAN 2000 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
NTP-Server: 149.49.52.134
44
Displays the keep-alive status
Displays the self-loop discovery mode
Page 68
Page 68
Avaya P333T User's Guide