Call Sign Setting For Call Ringer - Yaesu FTM-100DR Instruction Manual

Example: When the distance is set at a radius of 10 km
• MSG VOICE: Reads out messages. When set to ON, this function reads the
4
Turn the DIAL and select [1 TX BEACON].
5
Press and select ON or OFF.
Pressing
6
Turn the DIAL to select [2 TX MESSAGE], [3 RX
BEACON], [4 RX MESSAGE], [5 MY PACKET], [6 CALL RINGER], [7 RANGE
RINGER], or [8 MSG VOICE] then select
Pressing
7
Press for one second or longer.
The bell ring will be set and the display will return to the previous screen.
Tip Factory default value: 1 TX BEACON: ON

Call sign setting for CALL RINGER

Turn ON "CALL RINGER" under [10 APRS] → [8 APRS RINGER] in the set-up menu to
set the call signs of stations that will ring the special bell. You can set call signs for up to
8 stations.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [9 APRS RINGER (CALL)],
then press
The call sign list will be displayed.
: Normal bell ring
: RNG RINGER special bell ring
My station
Radius 10 km
content (call sign and main text) of all messages starting with "%" at
the top ("FVS-2" optional voice guide unit required).
turns this function ON and OFF.
turns this function ON and OFF.
2 TX MESSAGE: ON
3 RX BEACON: ON
4 RX MESSAGE: ON
5 MY PACKET: ON
6 CALL RINGER: OFF
7 RANGE RINGER: OFF
8 MSG VOICE: OFF
.
Using the APRS set-up menu
ON or OFF for each one.
.
62