IBM System x3850 X6 Installation And Service Manual page 1108

806f0807-0303ffff • 806f0807-0304ffff
806f0807-0303ffff [ProcessorElementName] has been Disabled.
Explanation: IMM has reported that microprocessor 3 has been disabled.
May also be shown as 806f08070303ffff or 0x806f08070303ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
"Finding the UEFI (POST) error code" on page 1666
v
806f0807-0304ffff [ProcessorElementName] has been Disabled.
Explanation: IMM has reported that microprocessor 4 has been disabled.
May also be shown as 806f08070304ffff or 0x806f08070304ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
"Finding the UEFI (POST) error code" on page 1666
v
1090
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide