Camera Menu
Selecting
PTZ: Selecting PTZ and choosing the camera number allows you to control the selected
Zoom: Selecting Zoom and choosing the camera number zooms the current image
Audio: Selecting Audio toggles audio output On and Off.
Color Control: Selecting Color Control and choosing the camera number allows
Menu Control: Selecting
Spot Monitor: Selecting Spot Monitor allows you to select the camera you want
Edit Group: Selecting Edit Group enters to the Active Cameo mode.
Triplex: Selecting
Search
Selecting
All Channels: Selecting All Channels exits the live monitoring mode and enters the
Triplex: Selecting Triplex enters the Triplex mode.
Setup
Selecting
Status
Selecting
Searching Video
While in the search mode, pressing the
the screen. Pressing the
pressing the arrow buttons.
20
displays the Camera Menu.
camera as long as it has Pan, Tilt and Zoom capabilities.
of the selected camera on the screen.
you to control brightness, contrast, hue and saturation for each camera for the selected
camera.
camera number allows you to change camera settings supported in the camera.
This is supported only when the camera uses Pelco-C protocol and supports the
UTC (Up The Coax) function.
to display on a Spot monitor.
(Search) → Triplex enters the Triplex mode. It enables
monitoring, recording and playing back at the same time.
displays the Search Menu.
search mode.
enters the Main Setup screen.
will allow you to check the status of the DVR's system, inputs and storage.
button displays the following Search menu on the right edge of
MENU
button again hides the menu. You can navigate through menus and items by
MENU
(Camera Menu) → Menu Control and choosing the
Search
Go To
Bookmark
Display
Previous Group
Next Group
Alarm
Panic
Camera Menu
Export
Status
Data Source
Exit