Section 1: Introduction
1.4.12 Touch Panel Controller (TPC)
The TPC is a portable, touch-sensitive screen used to control the projector. It is mounted to the rear of the
projector and can be adjusted at any angle using the flexible double ball joint mount for convenient viewing
and flexible operation in various installation configurations. The TPC provides users with a means for
monitoring operation and status of the projector. Users can turn the lamp ON/OFF, select a specific source/
input, and obtain basic status information. Depending on the installation, the TPC can remain mounted to the
projector or wall mounted anywhere else at the site. An optional extension cable is also available, which can be
purchased separately to provide TPC access up to 100 feet away.
1.4.13 List of Components
Ensure the following components were received with the projector:
Projector with Touch Panel Controller
User Manual
Warranty Card
Web Registration Form
Line Cord
NOTE: Lamp and Lens supplied separately.
1-10
CP2210 Setup Guide
020-100524-02 Rev. 1 (11-2010)