Projector Overview; Key Features - Christie Solaria CP2210 Setup Manual

1.4

Projector Overview

The CP2210 is a professional quality, easy-to-use
DMD projector utilizing Digital Light Processing
™
(DLP ) Cinema technology from Texas Instruments.
™
It's all-in-one design integrates all components in a
sleek projection head that can be table-top mounted
or used with the optional rack stand. Integrating
smoothly into traditional projection environments
such as theatres and other wide screen exhibitor
venues, the CP2210 offers stunning wide screen,
high-resolution cinema images that remain flawless
from first release to final show. The CP2210
interfaces with local networks typical in theatres
throughout the world, and can be expanded even
further by connecting non-cinema DVI source
material for multimedia presentations from a variety
of formats.

1.4.1 Key Features

• Three-chip mDC2K DLP Cinema
• .98" "mDC2K" panel format: 2,048(H) x 1,080 (V).
• Maximum light output of 12, 500 centre lumens, depending on lamp used.
• Available for use with 2.0kW, 1.8kW and 1.4kW Xenon lamps supporting theatre screens up to 30 feet in
width.
• All-in-one design (including Lamp Power Supply).
• CineBlack contrast management for contrast ratios of 450:1 ANSI and 2000:1 full field.
™
• CinePalette color management for film-like colorimetry.
™
• Easily accessible Input/Output panel located on the operator side of the projector with access to:
• Two SMPTE 292M inputs, intended for cinema content – operable as two independently selectable inputs
or as a single dual-link input (both inputs used simultaneously for one source).
• Two DVI-D inputs, intended for alternative content – operable as two independently selectable inputs or as
a single twin- or dual-link input (dual-link requires optional adapter).
• RS232 Connections – one for Projector Intelligence Board (PIB) and one for TI electronics (ICP).
• Single projector Ethernet network connection.
• Dedicated 3D connection plug for interfacing with third party 3D systems.
• Easy-to-read three coloured LED indicators on the rear corners of the projector for status indication.
• Supports CineLink
• LiteLOC feature for constant image brightness.
™
• LampLOC feature for motorized three-axis lamp alignment (automatic or individually adjusted).
™
• Available suite of field-interchangeable "prime" zoom lenses supporting 1.85:1 and 2.39:1 image formats.
• Prime lens provides electronic adjustment of focus (stepper motor).
• Prime lens provides electronic adjustment of zoom (stepper motor).
• Lens mount provides electronic adjustment of horizontal and vertical offset (stepper motors).
• Optional Motorized Auxiliary Lens Mount for flat to scope format conversion (for optional 1.25x anamor-
phic or 1.26x converter lens).
CP2210 Setup Guide
020-100524-02 Rev. 1 (11-2010)
light engine.
®
II link encryption on SMPTE 292M inputs.
®
Section 1: Introduction
Figure 1-1 CP2210 Projector
*Manual adjustment is available in case of motor failure.
1-5