Installing A Patch On The Lpu; Establishing The Configuration Task; Uploading The Lpu Patch - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations

12.7 Installing a Patch on the LPU

12.7.1 Establishing the Configuration Task

Applicable Environment
When required to make up the defects of the LPU, you can install a patch on the LPU.
Through installing a patch, you can upgrade the system without upgrading the system
software.
When a patch is uploaded, the system checks that the patch version is the same as the system
version. If the two versions are not the same, the system prompts that the patch uploading
fails.
When installing a patch on the LPU, you need to delete the running patch.
Pre-configuration Tasks
Before installing a patch on the LPU, upload the patch to the root directory of the of the
master and slave MPU s.
Data Preparation
None.
Configuration Procedures
No.
1
2
3

12.7.2 Uploading the LPU Patch

Do as follows on the router to be upgraded.
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
patch load file-name slot slot-id
The LPU patch is uploaded.
----End
Issue 04 (2009-12-20)
Procedure
Uploading the LPU Patch
Activating the LPU Patch
Running the LPU Patch
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Patch Management
12-11