Configuring The Electronic Labelelectronic; Establishing The Configuration Task; Querying The Electronic Label; Backing Up The Electronic Label - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations

10.4 Configuring the Electronic Labelelectronic

10.4.1 Establishing the Configuration Task

Applicable Environment
When querying for the electronic label information of all boards including the optical module
and individual entity on the chassis, or backing up the electronic label information to a
specified FTP server, you need to configure the electronic label function.
Pre-configuration Tasks
None.
Data Preparation
None.
Configuration Procedures
No.
1
2

10.4.2 Querying the Electronic Label

Step 1 Run:
display elabel [ slot-id ]
The electronic label is queried.
----End

10.4.3 Backing Up the Electronic Label

Do as follows on the router whose electronic label to be backed up.
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
backup elabel filename [ slot-id ]
The electronic label is backed up to the default FLash Memory.
----End
Issue 04 (2009-12-20)
Procedure
Querying the Electronic Label
Backing Up the Electronic Label
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Router Maintenance
10-7