Huawei V300R005 Configuration Manual page 208

Quidway NetEngine80
Configuration Guide - Basic Configurations
sftp-client>
Step 7 Verify the configuration.
The attacker fails to access the SSH server through port 22.
[client002] sftp 10.164.39.222
Input Username:client002
Trying 10.164.39.222 ...
Press CTRL+K to abort
Can't establish tcp connection to server
After the configuration, run the display ssh server status and display ssh server session
commands. You can view the number of the port monitored by the SSH server and that the
STelnet client or SFTP client is connected to the SSH server successfully.
# Display the SSH status.
[Quidway] display ssh server status
SSH version :
SSH connection timeout :
SSH server key generating interval :
SSH Authentication retries :
SFTP server:
STELNET server:
SSH server port:
# Display the connection of the SSH server.
[Quidway] display ssh server session
Session 1:
Session 2:
----End
Issue 04 (2009-12-20)
Conn : VTY 3
Version : 2.0
State : started
Username : client001
Retry : 1
CTOS Cipher : aes128-cbc
STOC Cipher : aes128-cbc
CTOS Hmac : hmac-sha1-96
STOC Hmac : hmac-sha1-96
Kex : diffie-hellman-group1-sha1
Service Type : stelnet
Authentication Type : password
Conn : VTY 4
Version : 2.0
State : started
Username : client002
Retry : 1
CTOS Cipher : aes128-cbc
STOC Cipher : aes128-cbc
CTOS Hmac : hmac-sha1-96
STOC Hmac : hmac-sha1-96
Kex : diffie-hellman-group1-sha1
Service Type : sftp
Authentication Type : rsa
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1.99
60 seconds
0 hours
3 times
Enable
Enable
1025
9 Telnet and SSH
9-47