Configuring Timeout Of Vty User Authorization; Configuring Vty Terminal Attributes - Huawei V300R005 Configuration Manual

5 User Management
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
acl acl-number { inbound | outbound }
Configure the limits to calling in/out of VTY user interface.
When you need to prevent a user of certain address or segment address from logging in to the
router, use the inbound command; when you need to prevent a user who logs in to a router
from accessing other routers, and use the outbound command.
----End

5.4.4 Configuring Timeout of VTY User Authorization

Do as follows the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface vty first-ui-number [ last-ui-number ]
The VTY user interface view is displayed.
Step 3 Run:
authorization-cmd timeout timeout-value
The timeout of command line authorization I set.
----End
The product supports to authorize HWTACACS command line to login users according to
user level or SSH user name.
When the user logs in to the router and needs command line authorization, each command the
user inputs must be authorized by the HWTACACS server. When authorization is passed, the
command can be run.
If the user receives no authorization from the HWTACACS server within the timeout limit
time, the command cannot be run.

5.4.5 Configuring VTY Terminal Attributes

Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
5-18 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)