Huawei V300R005 Configuration Manual page 196

Quidway NetEngine80
Configuration Guide - Basic Configurations
Note: The max number of VTY users is 10, and the current number
<Quidway>
# Connect the STelnet client002 to the SSH server in the RSA authentication.
<client002> system-view
[client002] stelnet 10.164.39.222
Please input the username: client002
Trying 10.164.39.222 ...
Press CTRL+K to abort
Connected to 10.164.39.222 ...
***********************************************************
*
*
* no decompiling or reverse-engineering shall be allowed. *
* Notice:
*
* Unauthorized access or use may lead to prosecution.
***********************************************************
Note: The max number of VTY users is 10, and the current number
<Quidway>
Step 8 Verify the configuration.
After the configuration, run the display ssh server status and display ssh server session
commands. You can view that the STelnet service is enabled and the STelnet client is
connected to the SSH server successfully.
# Display the SSH status.
[Quidway] display ssh server status
STelnet server:
SSH version :
SSH connection timeout :
SSH server key generating interval : 6 hours
SSH Authentication retries :
SFTP server:
STELNET server:
# Display the connection of the SSH server.
[Quidway] display ssh server session
Session 1:
Issue 04 (2009-12-20)
of VTY users on line is 1.
All rights reserved (2000-2007)
Without the owner's prior written consent,
This is a private communication system.
of VTY users on line is 1.
Conn : VTY 3
Version : 2.0
State : started
Username : client001
Retry : 1
CTOS Cipher : aes128-cbc
STOC Cipher : aes128-cbc
CTOS Hmac : hmac-sha1-96
STOC Hmac : hmac-sha1-96
Kex : diffie-hellman-group1-sha1
Service Type : stelnet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
*
*
*
*
Enable
1.99
60 seconds
3 times
Disable
Enable
9 Telnet and SSH
9-35