Configuring A Cleaning Cycle For The Air Filter; Establishing The Configuration Task; Configuring A Checking Of The Air Filter Based On The Device Temperature - Huawei V300R005 Configuration Manual

10 Router Maintenance

10.5 Configuring a Cleaning Cycle for the Air Filter

10.5.1 Establishing the Configuration Task

Applicable Environments
You need to clean the air filter after the air filter has been running for a period of time.
Preconfigured Tasks
None.
Data Preparations
To configure a cleaning cycle for the air filter, you need the following data.
No.
1
Configuration Procedures
No.
1
2
3
4
10.5.2 Configuring a Checking of the Air Filter based on the
Device Temperature
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dustproof check-auto
10-8
If the electronic label should be backed up to a specified FTP server, run the backup elabel ftp host
filename username password [ slot-id ] command.
Data
Cleaning cycle of the air filter
Procedure

Configuring a Checking of the Air Filter based on the Device Temperature

Configuring a Cleaning Cycle for the Air Filter
Remonitoring the Cleaning Cycle of the Air Filter
Checking the Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)