Huawei V300R005 Configuration Manual page 206

Quidway NetEngine80
Configuration Guide - Basic Configurations
BC89D3DB 5A83698C 9063DB39 A279DD89
0203
010001
[client]
# Send the RSA public key generated on the client to the server.
[Quidway] rsa peer-public-key RsaKey001
Enter "RSA public key" view, return system view with "peer-public-key end".
[Quidway-rsa-public-key] public-key-code begin
Enter "RSA key code" view, return last view with "public-key-code end".
[Quidway-rsa-key-code] 3047
[Quidway-rsa-key-code] 0240
[Quidway-rsa-key-code] BFF35E4B C61BD786 F907B5DE 7D6770C3 E5FD17AB
[Quidway-rsa-key-code] 203C8FCB BBC8FDF2 F7CB674E 519E8419 0F6B97A8
[Quidway-rsa-key-code] EA91FC4B B9E18836 5E74BFD5 4C687767 A89C6B43
[Quidway-rsa-key-code] 1D7E3E1B
[Quidway-rsa-key-code] 0203
[Quidway-rsa-key-code] 010001
[Quidway-rsa-key-code] public-key-code end
[Quidway-rsa-public-key] peer-public-key end
Step 3 Create an SSH user on the server.
The SSH user has four authentication modes, namely, password, RSA, password-rsa, and all.
# Configure the VTY user Interface.
[Quidway] user-interface vty 0 4
[Quidway-ui-vty0-4] authentication-mode aaa
[Quidway-ui-vty0-4] protocol inbound ssh
[Quidway-ui-vty0-4] quit
# Create an SSH user with the name Client001. The authentication mode is password.
[Quidway] ssh user client001
[Quidway] ssh user client001 authentication-type password
# Set huawei as the password for the Client001 of the SSH user.
[Quidway] aaa
[Quidway-aaa] local-user client001 password simple huawei
[Quidway-aaa] local-user client001 service-type ssh
[Quidway-aaa] quit
# Configure service type of Client001 as STelnet.
[Quidway] ssh user client001 service-type stelnet
[Quidway]
[Quidway] ssh user client002 authentication-type rsa
Issue 04 (2009-12-20)
When the SSH adopts the password or password-rsa authentication, it requires you to configure a
local user with the same name.
When the SSH user adopts the RSA, password-rsa, or all authentication, the server should save the
RSA public key for the SSH client.
Create Client001 for the SSH user.
Create an SSH user with the name of Client002 and RSA authentication, bound to RSA
public key of the SSH client.
ssh user client002
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
9-45