5 User Management
Step 4 Run:
quit
Exit from the VTY user interface view.
Step 5 Run:
aaa
The AAA view is displayed.
Step 6 Run:
local-user user-name password { simple | cipher } password
Create local user and password.
----End
Configuring Password Authentication
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface vty number1 [ number2 ]
The VTY user interface view is displayed.
Step 3 Run:
authentication-mode password
Set the authentication mode as password.
Step 4 Run:
Set authentication password { simple | cipher } password
Set a password for this authentication mode.
----End
Configuring Non-Authentication
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface vty number1 [ number2 ]
5-20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)