Configuring Local User Priority; Configuring Access Restriction Of The Local User; Checking The Configuration - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations
local-user user-name state { active | block }
The local user status is configured.
----End

5.7.6 Configuring Local User Priority

Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name level level
The local user priority is configured.
----End

5.7.7 Configuring Access Restriction of the Local User

Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name access-limit access-limit
The access restriction of the local user is configured.
----End

5.7.8 Checking the Configuration

Run the following command to check the previous configuration.
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
5-29