Configuring The Ssh Server; Establishing The Configuration Task - Huawei V300R005 Configuration Manual

9 Telnet and SSH
Sftp-directory
Service-type
Authorization-cmd

9.4 Configuring the SSH Server

9.4.1 Establishing the Configuration Task

Applicable Environment
You must enable STelnet or SFTP on the SSH server to perform the operation. The SSH
server also supports setting the number of the monitored port. You can set the number of the
port monitored by the SSH server to other port numbers so that the attacker does not know the
change of the monitored port number. This can prevent the consumption of the bandwidth and
system resources caused by the attacker's access to the standard port of the SSH server.
Pre-configuration Tasks
Before configuring SSH servers, complete the following tasks:
Data Preparation
To configure SSH servers, you need the following data.
No.
1
Configuration Procedures
To configure an SSH server, you need to take following steps.
No.
1
2
3
4
5
9-16
: -
: sftp
: No
Connecting the SSH client and the SSH server correctly
Configuring reachable routes between the SSH client and the SSH server
Configuring the VTY user interface on the SSH server to support SSH
Configuring the SSH client on the SSH server
Creating the local RSA key pair on the SSH server
Data
Number of the port monitored by the SSH server
Procedure
Enabling the STelnet Service
Enabling the SFTP Service
(Optional)Enabling the Earlier Version-Compatible Function
(Optional)Configuring the Number of the Port Monitored by the SSH Server
(Optional) Enabling the Trap Function
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)