Huawei V300R005 Configuration Manual page 85

Quidway NetEngine80
Configuration Guide - Basic Configurations
local-user user-name password { simple | cipher } password
Name and password of the local user are created.
----End
Configuring Password Authentication
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface console 0
The console user interface view is displayed.
Step 3 Run:
authentication-mode password
You can set authentication mode as password authentication.
Step 4 Run:
set authentication password { cipher | simple } password
A password for authentication is set.
----End
Configuring Non-Authentication
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface console 0
The console user interface view is displayed.
Step 3 Run:
authentication-mode none
The authentication mode is set to non-authentication.
----End
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
5-9