Configuring The First-Time Authentication On The Ssh Client; Configuring The Ssh Client To Assign The Rsa Public Key To The Ssh Server - Huawei V300R005 Configuration Manual

9 Telnet and SSH
Configuration Procedures
To configure the function of SFTP client, you need to take the following steps.
No.
1
2
3
4
5
6
7
9.6.2 Configuring the First-Time Authentication on the SSH
Client
Do as follows on the router that serves as an SSH client:
Step 1 Run:
system-view
The system view is displayed.
ssh client first-time enable
Enable the first authentication of the SSH client.
----End
9.6.3 Configuring the SSH Client to Assign the RSA Public Key to
the SSH Server
Do as follows on the router that serves as an SSH client:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh client servername assign rsa-key keyname
Assign a public key to the SSH server.
----End
9-24
Procedure

Configuring the First-Time Authentication on the SSH Client

Configuring the SSH Client to Assign the RSA Public Key to the SSH Server

Enabling the SFTP Client
(Optional) Managing the Directory
(Optional) Managing the File
(Optional)Displaying the SFTP Client Command Help
Checking the Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine80
Configuration Guide - Basic Configurations
Issue 04 (2009-12-20)