Scheduled Telnet Disconnection; Checking The Configuration - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations

9.2.4 Scheduled Telnet Disconnection

Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
idle-timeout minutes [ seconds ]
The scheduled Telnet disconnection is enabled.
----End

9.2.5 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check the connection status of the current
user-interface.
Check the connection status of all user-interfaces.
Check the status of all the established TCP
connections.
Run the display tcp status command to view TCP connection status. When ESTAB indicates
that the TCP connection is established.
<Quidway> display tcp status
TCPCB
39952df8 36 /1509
32af9074 59 /1
34042c80 73 /17
Issue 04 (2009-12-20)
Tid/Soid Local Add:port
0.0.0.0:0
0.0.0.0:21
10.164.39.99:23
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
display users
display users all
display tcp status
Foreign Add:port
0.0.0.0:0
0.0.0.0:0
10.164.6.13:1147
9 Telnet and SSH
VPNID State
0 Closed
14849 Listening
0 Established
9-9