Copying Commands Using Shortcut Keys; Example For Using Tab - Huawei V300R005 Configuration Manual

3 CLI Overview
100.2.150.51/32 Direct
100.2.255.255/32 Direct 0
----End

3.5.2 Copying Commands Using Shortcut Keys

Step 1 Enter the command in any view.
# Move the cursor to the beginning of the command and press ESC_SHIFT_<. Move the
cursor to the end and press ESC_SHIFT_>. Then, press CTRL_Cf for copying.
<Quidway> display ip routing-table
Step 2 Run the display clipboard command to view the contents on the clipboard.
<Quidway> display clipboard
---------------- CLIPBOARD-----------------
display ip routing-table
Step 3 Press Ctrl+Shift+V to paste the contents of clipboard.
<Quidway> display ip routing-table
----End

3.5.3 Example for Using Tab

There are three cases in using Tab as shown in the following example:
Step 1 Type the incomplete key word.
[Quidway] info-
Step 2 Press Tab.
[Quidway] info-center
The system replaces the typed one with the complete key word and displays it in a new line
with the cursor a space behind
----End
[Quidway] info-center log?
logbuffer
Type the incomplete key word.
[Quidway] info-center l
Step 1 Press Tab.
3-14
100.2.0.0/16 Direct 0
127.0.0.0/8 Direct
The matching key word is unique after the incomplete key word is typed in.
There are several matches or no match at all after the incomplete key word is typed in.
# info-center can be followed by three key words.
logfile loghost
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Basic Configurations
0 D 100.2.150.51
0 0 D 127.0.0.1
0 D 127.0.0.1
0 0 D 127.0.0.1
Quidway NetEngine80
GigabitEthernet0/0/0
InLoopBack0
InLoopBack0
InLoopBack0
Issue 04 (2009-12-20)