Configuring The Source Address Of Tftp Client; Downloading Files Through Tftp; Uploading Files Through Tftp - Huawei V300R005 Configuration Manual

Quidway NetEngine80
Configuration Guide - Basic Configurations
Configuration Procedures
No.
1
2
3

8.5.2 Configuring the source address of TFTP Client

Do as follows on the router that serves as the TFTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
tftp client-source {-a source-ip-address | -i { interface-name | interface-type
interface-num }}
The source address of TFTP client is started.
----End

8.5.3 Downloading Files Through TFTP

Do as follows on the router that serves as the TFTP client:
Step 1 Run:
tftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ]
tftp-server get source-filename [ destination-filename ]
The router is configured to download files through TFTP.
----End

8.5.4 Uploading Files Through TFTP

Do as follows on the router that serves as the TFTP client:
Step 1 Run :
tftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ]
tftp-server put source-filename [ destination-filename ]
The router is configured to upload files through TFTP.
----End
Issue 04 (2009-12-20)
Procedure
Configuring the source address of TFTP Client
Downloading Files Through TFTP
Uploading Files Through TFTP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 FTP, TFTP and XModem
8-15