Special Characters For Srm Console - Compaq AlphaServer ES45 1B Owner's Manual

Table 5–3 Special Characters for SRM Console
Character
Return or En-
ter
Backslash (\)
Delete
Ctrl/A
Ctrl/B or
up-arrow
Ctrl/C
Left-arrow
Ctrl/E
Ctrl/F or
right-arrow
Ctrl/H
Backspace
Ctrl/J
Ctrl/O
Function
Terminates a command line. No action is taken on a com-
mand until it is terminated. If no characters are entered
and this key is pressed, the console just redisplays the
prompt.
Continues a command on the next line. Must be the last
character on the line to be continued.
Deletes the previous character.
Toggles between insert and overstrike modes. The default
is overstrike.
Recalls previous command or commands. The last 16 com-
mands are stored in the recall buffer.
Terminates the process that is running. Clears Ctrl/S; re-
sumes output suspended by Ctrl/O. When entered as part of
a command line, deletes the current line. Ctrl/C has no ef-
fect as part of a binary data stream.
Moves the cursor left one position.
Moves the cursor to the end of the line.
Moves the cursor right one position.
Moves the cursor to the beginning of the line.
Deletes ones character.
Deletes the previous word.
Stops output to the console terminal for the current com-
mand. Toggles between enable and disable. The output can
be reenabled by other means as well: when the console
prompts for a command, issues an error message, or enters
program mode, or when Ctrl/P is entered.
Firmware 5-7