Special Characters For Srm Console - Compaq AlphaServer DS20E Reference Manual

Table 7–3 Special Characters for SRM Console
Character
Return or
Enter
Backslash (\)
Delete
Ctrl/A
Ctrl/B or
up-arrow
Ctrl/C
Left-arrow
Ctrl/E
Ctrl/F or
right-arrow
Ctrl/H
Backspace
Ctrl/J
Ctrl/O
7-8 DS20E Reference Guide
All manuals and user guides at all-guides.com
Function
Terminates a command line. No action is taken on a
command until it is terminated. If no characters are
entered and this key is pressed, the console just redisplays
the prompt.
Continues a command on the next line. Must be the last
character on the line to be continued.
Deletes the previous character.
Toggles between insert and overstrike modes. The default
is overstrike.
Recalls previous command or commands. The last 16
commands are stored in the recall buffer.
Terminates the process that is running. Clears Ctrl/S;
resumes output suspended by Ctrl/O. When entered as part
of a command line, deletes the current line. Ctrl/C has no
effect as part of a binary data stream.
Moves the cursor left one position.
Moves the cursor to the end of the line.
Moves the cursor right one position.
Moves the cursor to the beginning of the line.
Deletes one character.
Deletes the previous word.
Stops output to the console terminal for the current
command. Toggles between enable and disable. The output
can be reenabled by other means as well: when the console
prompts for a command, issues an error message, or enters
program mode, or when Ctrl/P is entered.