Compaq AlphaServer ES45 1B Owner's Manual page 269

halt in
The halt in command is equivalent to pressing the Halt button on the control
panel.
The halt in command halts the managed system. When the halt in command
is issued, the terminal exits RMC and returns to the server's COM1 port.
Toggling the Power button on the operator control panel overrides the halt in
condition.
RMC> halt in
Returning to COM port
halt out
The halt out command is equivalent to releasing the Halt button on the control
panel.
The halt out command releases a halt. The terminal exits RMC and returns to
the server's COM1 port.
RMC> halt out
Returning to COM port
You cannot use halt out to release a halt if the Halt button on the operator con-
trol panel is latched in. If you issue the command, the following message is dis-
played:
RMC> halt out
Halt button is IN
hangup
The hangup command terminates the modem session.
If you do not issue the hangup command, the session is disconnected automati-
cally after a period of idle time set by the set logout command. The default is
20 minutes.
RMC> hangup
RMC>
Remote Management 6-31