Compaq AlphaServer ES45 1B Owner's Manual page 153

LED is on
The drive is being accessed or spinning up. The drive status is one
of the following:
•
Replacement drive to be rebuilt
•
The drive is an active spare disk.
•
The drive is spinning up during POST.
•
The SCSI controller cannot control LED.
The drive is being accessed. The drive status is one of the following:
•
Drive is being rebuilt
•
Array capacity expansion in progress
•
•
The drive is operational and active.
The drive is configured as part of an array.
When the drive is non-operational, the display may be one of the
following. In both cases, the drive may be replaced.
The drive is non-operational.
There is no power to the drive.
There is a drive error and the drive is not active.
Check the storage system graphical user interface (GUI) for a defi-
nition of the problem.
LED is off
Configuring and Installing Components
LED is flashing
4-43