Compaq AlphaServer ES45 1B Owner's Manual page 276

set password
The set password command allows you to set or change the password that is
prompted for at the beginning of a modem session.
A password must be set to enable access through a modem. The string cannot
exceed 14 characters. For security, the password is not echoed on the screen.
When prompted for verification, type the password again. If you mistype, reen-
ter the set password command.
RMC> set pass
RMC Password: ****
Verification: ****
*** ERROR - Verification failed, password is not set ***
RMC> set pass
RMC Password: ****
Verification: ****
set user
The set user command allows you to set a user string to be displayed in the
status command.
You may want to make notes regarding the system. The string is limited to 63
characters and is displayed in the User String field when you enter the status
command.
In this example, the operator leaves a reminder that a power supply needs to be
replaced.
RMC> set user
User String: need to replace P/S
RMC> status
PLATFORM STATUS
.
.
.
User String: need to replace P/S
status
The status command displays the system status and the current RMC settings.
See Section 6.6.1 for details and an example.
6-38 ES45 Owner's Guide