Entering The Rmc From The Local Vga Monitor - Compaq AlphaServer ES45 1B Owner's Manual

5.13 Entering the RMC from the Local VGA Monitor

Use the rmc command to enter the remote management console from a
VGA monitor connected to the system. All RMC commands are avail-
able and all output is redirected to the VGA monitor.
Example 5–18 Entering RMC from a VGA Monitor
Failing Connection
P00>>> rmc
Unable to allocate COM1. Currently in use by: shell
To connect to the Remote Management Console from the
graphics interface the "console" environment variable
must be set to "graphics," and the serial interface cannot
be in use by another console program.
RMC>
Successful Connection
P00>>> rmc
You are about to connect to the Remote Management Console.
Use the RMC reset command or press the front panel reset button to
disconnect and to reload the SRM console.
Do you really want to continue? [y/(n)] y
Please enter the escape sequence to connect to the Remote Management
Console.
Exiting from the Graphics Interface
RMC> reset
5-38 ES45 Owner's Guide