Ei*0_Mode Or Ew*0_Mode - Compaq AlphaServer ES45 1B Owner's Manual

5.14.12 ei*0_mode or ew*0_mode

The ei*0_mode or ew*0_mode environment variable sets an Ethernet
controller to run an AUI, ThinWire, or twisted-pair Ethernet network.
For the fast setting, the device defaults to fast.
To list the network devices on your system, enter the show device command.
The Ethernet controllers start with the letters "ei" or "ew," for example, ewa0.
The third letter is the adapter ID for the specific Ethernet controller. Replace
the asterisk (*) with the adapter ID letter when entering the command.
Syntax
set ei*0_mode value or
set ew*0_mode value
The options for value are:
aui Device type is AUI.
Device type is ThinWire.
bnc
Device type is fast 100BaseT.
fast
Fastfd Device type is fast full duplex 100BaseT.
Device type is full duplex twisted-pair.
full
Device type is 10BaseT (twisted-pair).
twisted-pair
Example
P00>>> set eia0_mode t
P00>>> show eia0_mode
ewa0_mode twisted-pair
Firmware 5-61