help or ?
The help or ? command displays the RMC command set.
RMC> help
clear {alert, port}
deposit
disable {alert, remote}
dump
enable {alert, remote}
env
halt {in, out}
hangup
help or ?
power {off, on}
quit
reset
send alert
set {alert, com1_mode, dial, escape, init, logout, password, user}
status
power off
The power off command is equivalent to turning off the system power from the
operator control panel.
If the system is already powered off, this command has no effect. You can over-
ride the power off command either by issuing a power on command or by tog-
gling the Power button on the operator control panel.
RMC> power off
RMC>
power on
The power on command is equivalent to turning on the system power from the
operator control panel.
If the system is already powered on, this command has no effect. After the
power on command is issued, the terminal exits RMC and reconnects to the
server's COM1 port.
RMC> power on
Returning to COM port
6-32
ES45 Owner's Guide
Need help?
Do you have a question about the AlphaServer ES45 1B and is the answer not in the manual?