Compaq AlphaServer ES45 1B Owner's Manual page 114

To Remove Enclosure Panels from a Tower
The enclosure panels are secured by captive screws.
1. From the open position
2. To remove the top panel, loosen the top left and top right screws
the top panel back and lift it off the system.
3. To remove the left panel, loosen the screw
the bottom. Slide the panel back and then tip it outward. Lift it off the sys-
tem.
4. Go to Section 4.2 for instructions on removing covers from the system chas-
sis.
4-4 ES45 Owner's Guide
, lift up and away to remove the front door
at the top and the screw
.
. Slide
at