Srm Command Overview; Summary Of Srm Console Commands - Compaq AlphaServer ES45 1B Owner's Manual

5.3

SRM Command Overview

Table 5–1 summarizes alphabetically the most frequently used SRM
console commands; Table 5–2 gives the command notation formats; and
Table 5–3 shows special characters used on the command line.
Table 5–1 Summary of SRM Console Commands
Command
boot
continue
crash
edit
help (or man)
command
init
more [file-
name]
rmc
set envar
show envar
5-4 ES45 Owner's Guide
Function
Loads and starts the operating system.
Resumes program execution on the specified processor or on
the primary processor if none is specified.
Forces a crash dump at the operating system level.
Invokes the console line editor on a RAM script or on the
user power-up script, "nvram," which is always invoked dur-
ing the power-up sequence.
Displays information about the specified console command.
Resets the SRM console and reinitializes the hardware.
Displays a file one screen at a time.
Invokes the remote management console from the local VGA
monitor.
Sets or modifies the value of an environment variable.
Displays the state of the specified environment variable.
Continued on next page