Compaq AlphaServer ES45 1B Owner's Manual page 60

Example 2–6 Show Config (Continued)
Slot Option
7 Acer Labs M1543C
8 ELSA GLoria Synergy
9 DECchip 21152-AA
10 DECchip 21041-AA
11 DE500-AA Network Con
12 Yukon PCI Hot-Plug C
16 Acer Labs M1543C IDE
6302B
Option
Floppy
Slot Option
0 DE500-BA Network Con
1 DE500-BA Network Con
2 DE500-BA Network Con
3 DE500-BA Network Con
Slot Option
1/0 Adaptec AIC-7899
1/1 Adaptec AIC-7899
6 Yukon PCI Hot-Plug C
Slot Option
1 DEGPA-SA
2 DEGPA-SA
Slot Option
1/0 Adaptec AIC-7899
1/1 Adaptec AIC-7899
6 Yukon PCI Hot-Plug C
P00>>
This part of the command output shows the PCI cards on a system that has
a 10-slot I/O backplane.
The "Slot" column lists the slots (logical IDs) seen by the system. Logical
IDs identify both installed PCI cards and onboard chips. In this example,
the onboard chips include the Yukon PCI hot-plug controller and the Acer
Labs M1543C IDE.
The logical IDs do not correspond directly to the physical slots into which
the devices are installed. See Table 2–2 for the correspondence between
logical IDs and physical slots.
2-18 ES45 Owner's Guide
Hose 0, Bus 0, PCI − 33 MHz
vga0.0.0.8.0
ewe0.0.0.10.0
ewf0.0.0.11.0
dqa.0.0.16.0
dqb.0.1.16.0
dqa0.0.0.16.0
Hose 0, Bus 1, ISA
dva0.0.0.1000.0
Hose 0, Bus 2, PCI − 33 MHz
ewa0.0.0.2000.0
ewb0.0.0.2001.0
ewc0.0.0.2002.0
ewd0.0.0.2003.0
Hose 1, Bus 0, PCI − 66 MHz
pka0.7.0.1.1
dka0.0.0.1.1
pkb0.7.0.101.1
Hose 2, Bus 0, PCI − 66 MHz
Hose 3, Bus 0, PCI − 66 MHz
pkc0.7.0.1.3
pkd0.7.0.101.3
Bridge to Bus 1, ISA
Bridge to Bus 2, PCI
00-00-F8-1F-AE-0A
00-00-F8-1B-0B-24
TOSHIBA CD-ROM XM-
00-06-2B-00-E7-82
00-06-2B-00-E7-83
00-06-2B-00-E7-84
00-06-2B-00-E7-85
SCSI Bus ID 7
COMPAQ BD018122C9
SCSI Bus ID 7
SCSI Bus ID 7
SCSI Bus ID 7