Figure 126: "Send Sms" Screen - Gamatronic Power+ User Manual

Gamatronic Electronic Industries Ltd.
Simulate UPS output source on battery: clicking on this link simulates the conditions in effect
during an ac power failure –a signal is sent via SNMP to any connected computers informing
them of an ac power failure. (In actuality, the load continues to be supplied from the inverter). If
the computers are configured for automatic shutdown on ac power failure, they begin their
shutdown countdown. This option is useful for testing the auto-shutdown configuration on a
computer. The simulation can be ended by the user at will. If the countdown continues to
completion, the designated shutdown targets (see section 11.3.10.4 on page 90) will be shut
down!
Simulate UPS battery status is low: clicking on this link simulates the conditions in effect after
an extended ac power failure –a signal is sent via SNMP to any connected computers informing
them of a "low battery condition" (actually non-existent). If the computers are configured for
automatic shutdown on low battery, they begin their shutdown countdown. This option useful for
testing the auto-shutdown configuration on a computer. The simulation can be ended by the user
at will.
Warning: The low-battery countdown is configured in seconds, so computer shutdown will occur
relatively quickly.
11.3.7 "Send SMS" main menu option
On Power+ units equipped with the optional GSM cellular communications module, the "Send
SMS" main menu option enables the user to send an SMS message to any cellular telephone.

Figure 126: "Send SMS" screen

POWER + RM 50
83
VA, N.Am. Std. – User Guide, Release 1.4
K