Table of Contents
Advertisement
Gamatronic Electronic Industries Ltd.
3.2
The POWER+ display screen
The display screen on the Mega V2 SA25 control panel shows the current operating mode and
related critical data. There are several distinct data screens that can be shown on the Mega V2
SA25 display screen.
3.2.1
The main screen
The Mega V2 SA25 main screen is the default display on the Mega V2 SA25 screen. From any
other screen, if the keyboard is not used for 45 seconds, the Mega V2 SA25 returns to the main
screen.
The main screen shows the UPS's current operating mode and other critical data.
Other screens describing current operating conditions can be seen by navigating "upwards" or
"downward" with the UP/DOWN key.
The first line of the main screen shows whether the UPS is currently on or off. The second line
tells you the most important information about the UPS's current status. Most of the time it will
read "NORMAL MODE". The UPS can also automatically transfer to:
• BATTERY MODE
• BYPASS MODE
• UPS OFF
The L1, L2, and L3 numbers in the main screen show the current load rate as a percent of
maximal ac load at each phase.
Figure 7: The main screen
User Guide: MEGA V2 SA25, Release 1.5
9
Advertisement
Table of Contents
