G-Eye - Gamatronic Power+ User Manual

Gamatronic Electronic Industries Ltd.
10.2

G-Eye

G-Eye adds value to your Power+:

Option to connect external temperatures sensors, humidity sensors, and frequency
sensors.

Inputs for ac/dc current and voltage measurements through Gamatronic sensors.

When the measured value moves outside a user-defined range, G-Eye immediately
informs pre-selected targets of the alarm condition.

One 4~20 mA input.

Input dry contacts available for on/off external sensors.

Output dry contacts for control of external devices.

Supports TCP/IP and SNMPv2.

Controlled shutdown of servers on ac mains power failure, with user-defined time-delay.
(*)

Auto-wake-up of servers on restoration of ac power, after user-defined time-delay. (*), (**)

Include internal GSM modem (quad-band) for additional backup/control/management
without LAN dependency.

Bi-directional control via simple SMS commands.

Automatic response to sensed events. For example, the G4 can be programmed to turn
on an air conditioner when it senses that the room temperature has exceeded a user-
defined level.

Notifies designated targets of alarm conditions via email, SMS, and SNMP traps.

Double power feed for reliability.

Internal battery backup.

Quick installation.
(*) Not all operating systems supported.
(**) Auto-wake-up requires "wake-on_LAN" BIOS feature on target computers. Not all operating systems
supported.
Note: G4 requires disconnection of the Power+ internal network card. Consult Gamatronic's
support team before ordering.
POWER + RM 50
VA, N.Am. Std. – User Guide, Release 1.4
K
73