Figure 70: Alarm Integration Factor Setting; Figure 71: Line Configuration Menu; Figure 72: Setting Number Of Phases; Figure 73: Setting The Sine Wave Frequency - Gamatronic Power+ User Manual

Alarm set
menu
Option 9
The Alarm Integration Factor determines the number of times that the controller polls and retries
to determine the USP status before deciding on an error status. Setting the alarm integration
factor too low will cause spurious alarms to be generated; conversely, setting the alarm
integration factor too high may result in an alarm only being raised when it is already too late to
take corrective action.
Setup
menu
Option 2
Module
config menu
Option 1
Module
config menu
Option 2
Module
config menu
Option 3
Module
config menu
Option 4
56

Figure 70: Alarm integration factor setting

Figure 71: Line configuration menu

Figure 72: Setting number of phases

Figure 73: Setting the sine wave frequency

Figure 74: Setting the module voltage

Figure 75: Setting confirmation

POWER + RM 50
Gamatronic Electronic Industries Ltd.
VA, N.Am. Std. – User Guide, Release 1.4
K