Figure 131: Define Computers For Auto-Shutdown; Ip Address - Gamatronic Power+ User Manual

11.3.10.4 PC notification and shutdown targets
The "PC notification and shutdown targets" option of the Configuration menu is where you record
the IP address of the computers which you want to have perform an orderly shutdown in the
event of an ac mains power outage.
To use this option, the computer in question must have a Shutdown Agent installed on it. The
Shutdown Agent is available as a self-installing "setup.exe" file intended to be run on the target
computer. The install file is delivered on a compact disk (CD) that accompanies the UPS.
Note: The built-in Web interface supports a maximum of 15 shutdown targets. Customers
requiring a larger number of shutdown targets should inquire about the PSM-AC for Power+
software product (see section 8 on page 67).
F
IELD

IP address

UDP port
Ac fail delay
(minutes)
Low battery delay
(seconds)
90

Figure 131: Define computers for auto-shutdown

D
ESCRIPTION
IP address of the computer to be automatically shut down in the event of
a power failure.
Preferred UPD port, if any.
Delay in minutes between ac failure and initiation of the automatic
shutdown.
Delay in seconds between low-battery alarm and initiation of the
automatic shutdown.
POWER + RM 50
Gamatronic Electronic Industries Ltd.
VA, N.Am. Std. – User Guide, Release 1.4
K