Table of Contents
Advertisement
System Startup Wizard
3.3.6.1.
When the UPS is initially started up, a series of configuration screens are presented on the LCD
display panel. You will be prompted to provide the UPS with basic system configuration
information in order to enable initial operation of the UPS.
To perform first time UPS configuration:
1. Activate the UPS.
After the UPS is activated, the Start screen appears:
Figure 22: Initial configuration wizard: Start screen
2. Write down the MAC address displayed on the screen and press Next.
UPS for 208 Vac Grid, Installation Guide, doc. rel. 3.0
42
Advertisement
Table of Contents
