4.4
Initial configuration
On the initial startup of the Centric, a series of configuration screens are presented on the display panel.
Through these screens you supply the Centric with required, basic configuration information to enable
initial operation of the Centric.
The initial configuration process is described here.
1.
On the "Start" screen, press "Next".
2.
The password screen is displayed.
Enter the password provided by your distributor or sales agent and press "OK".
Without such a password you cannot continue.
32
G
E
AMATRONIC
Figure 24: Initial configuration wizard, "Start" screen
Figure 25: Initial config. wizard: password entry
I
L
LECTRONIC
NDUSTRIES
TD
Centric 3x480 Vac, Installation Guide, rel. 2.2
.