Figure 34: Overall Phase Voltages/Currents; Figure 35: Elapsed Time; Figure 36: Jumper Settings Without Remote Panel; Figure 37: Jumper Settings With Remote Panel - Gamatronic Power+ User Manual

System
menu
Option 1
System
menu
Option 1
System
menu
Option 1
System
menu
Option 1
Note: In Figure 38 and Figure 39, "Silicon Mode" indicates that the configuration jumper is
installed, thus allowing for modifications. "Hard Silicon" indicates that the factory defaults
hard reset jumper is installed. This is required only at the factory or whenever software reset
fails.
System
menu
Option 1
System
menu
Option 1
Note: The data displayed in Figure 39 depend on the options installed and configured. See
Figure 80 on page 58 and Figure 97 on page 61.
46

Figure 34: Overall phase voltages/currents

Figure 35: Elapsed time

Figure 36: Jumper settings WITHOUT remote panel

Figure 37: Jumper settings WITH remote panel

Figure 38: Controller – internal voltages

Figure 39: Battery temperature

POWER + RM 50
Gamatronic Electronic Industries Ltd.
VA, N.Am. Std. – User Guide, Release 1.4
K