Figure 16: Normal Display, System Under Load - Gamatronic Power+ User Manual

6. Use the up/down arrow keys to move the blinking cursor to
option 2 (60 Hz) or
option 3 (50 Hz),
then press "Enter". The characters "(selected)" appear to the right of your choice.
(Do not choose option 1 – Hard).
7. Press "Esc".
4.8.3 Continue first-time startup
1. Switch all battery switches "ON" – on the UPS and on all battery cabinets, if any.
2. You can now turn on the load devices.
3. After turning on the load devices, verify that you have a normal reading on the display
screen. The display will look like that in Figure 16 but of course your readings will be
different.
Figure 6: Default screen display
Continue with section 4.9 on page 31.
30

Figure 16: Normal display, system under load

POWER + RM 50
Gamatronic Electronic Industries Ltd.
VA, N.Am. Std. – User Guide, Release 1.4
K