Downloads From The Data Center To Your Machine - Pitney Bowes DM300c Operator's Manual

6 • Adding Postage/Connecting to Data Center

Downloads from the Data Center to Your Machine

When you connect to the Pitney Bowes Data Center to add postage
or perform other functions, the Data Center may activate other
downloads while the machine is connected. If some type of software/
postal update or download is available, a message stating so
displays.
• If a download is not mandatory, you will be prompted with either
"Get Update now" or "Skip; Get later". Select the one that makes
sense to you at that time.
• If a download is mandatory, only "Get Update now" displays and
you must perform the download.
After the download has completed, a message stating so displays.
• If you need to reboot the system, the prompt "Restart now"
displays. Select this to restart the system.
• If no rebooting is necessary, simply select "Continue" to return to
the Home screen.
IMPORTANT:
You should not remove power or analog/Internet connection to
the Pitney Bowes Data Center during a software upgrade or rates
download.
Wait until the meter has finished processing before disconnecting
the meter. You will know this has occurred when the meter's Home
screen showing postage and date displays.
The following downloads/activities may occur when your system is
connected to the Pitney Bowes Data Center:
System/Software Update
If there has been an important update to the software that runs your
system, you will be notified that a required update is necessary.
Envelope Ads/ Postal Inscriptions
If you ordered new envelope advertisements or postal inscriptions,
you will be notified that you can perform a download to obtain these.
SV62261 Rev. C
6-3