12 • Maintenance
Maintaining the Moistener (cont'd)
Cleaning the Shield and Wick (DM400c/DM475)
This procedure assumes you have already removed the
NOTE:
i
stripper blade/brush assembly (see previous pages).
1.
Open the feeder access cover (DM400c) or feeder/WOW cover
(DM475), remove the moistener bottle, and place it on the table
top with its cap facing up.
DM400c Moistener Bottle
2.
Pull the moistener tank (located under moistener bottle) straight
out towards you. Gently lift the tank up and out.
IMPORTANT:
The moistener tank may be full of E-Z Seal
If so, you can pour the solution back into the moistener bottle
or into a receptacle.
DM400c Moistener Tank
12-18
DM475 Moistener Bottle
sealing solution.
®
DM475 Moistener Tank
SV62261 Rev. C