Configuring The Tape Button - Pitney Bowes DM300c Operator's Manual

7 • System Options
Basic Options (cont'd)

Configuring the Tape Button

You can specify the action the system takes when the Tape button is
pressed.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Configure Tape Button".
• If you always want to print one tape at a time, select "Always
Print One Tape".
• If you want to enter the number of tapes to print, select "Ask
For Tape Quantity".
Once you make your selection, the system returns to the Setup
Menu.
7-12
SV62261 Rev. C