Pitney Bowes DM300c Operator's Manual page 107

Basic Options (cont'd)
Disabling the Supervisor Password
You can disable the Supervisor Password if it has been enabled.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Disable Password".
6. When prompted, enter the current Supervisor Password and
select "Accept".
Changing the Supervisor Password
You can change the Supervisor Password if it has been enabled.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Change Password".
6. When prompted, enter the current Supervisor Password and
select "Accept".
7. Enter the new Supervisor Password, and select "Accept".
8. Re-enter the new password to confirm and select "Accept".
9. At the "Password Enabled" message, select "OK".
SV62261 Rev. C
7 • System Options
7-11